Install Specs

Overall Dimensions:

Cut-Out Dimensions:

This grill is designed for outdoor use only. DO NOT use this grill inside a building, garage, enclosed area, or under an unprotected overhead combustible construction. DO NOT use this grill in or on a recreational vehicle or boat.Important: If installing this grill in a combustible surround, the correct AOG insulating liner must be used. Important: The grill must have a minimum clearance of 18″ from combustible materials/items AT ALL TIMES. Overhead Construction Requirements (if applicable) Non-combustible overhead construction: A 6 foot clearance is required between the countertop and the construction above (Fig. 10-1).Combustible overhead construction: A 6 foot clearance is required between the countertop and the construction above. A vent hood (see EXHAUST REMOVAL section) or an AOG combustible overhead protection kit is required directly above the grill. Vent hoods and protection kits are available. Side and Rear Wall Clearances For the minimum clearances between the grill and any side or rear walls, your setup must fall within one (or more) of the following:

A. Clearance between grill and strictly non-combustible wall (i.e. brick wall, see Fig. 10-2)

• The grill must have a minimum of 4″ right, left, and rear clearance from any non-combustible wall. (To allow for proper ventilation and prevent dangerous overheating.)

B. Clearance between grill and a protected combustible wall (i.e. a non-combustible wall in front of a combustible wall to serve as a barrier. This can be accomplished by brick, or a metal stud finished with non-combustible substrate, see Fig. 10-3)

• The grill must have a minimum of 14″ right, left, and rear clearance from the protected combustible wall. (The 4″ non-combustible material plus an additional 10″ clearance between the grill and protected wall.)

C. Clearance between grill and combustible wall

• The grill must have a minimum of 18″ right, left, and rear clearance from any combustible wall.

Backsplash Clearance (if applicable) If a non-combustible backsplash exists, it must have a minimum of a 4″ clearance from the rear of the grill (to allow for proper ventilation and prevent dangerous overheating).  This 4″ backsplash clearance must first be met prior to any non-combustible walls beginning behind it.