Install Specs

Overall Dimensions:

Cut-Out Dimensions:

Clearance:

•FROM NON-COMBUSTIBLE MATERIALS: Coyote grills can be placed directly on, or adjacent to, non-combustible materials, subject to ventilation requirements. The hood on a Coyote grill pivots mainly on the body. If you have a wall or partition behind the unit that would block ventilation, then a minimum of 7″ clearance from the back of the grill to the wall is needed for the purpose of ventilation. If you do not have a wall or partition blocking the ventilation of the unit, then you only need an extra 3 ¼” behind the unit for the hood to open fully.

FROM COMBUSTIBLE MATERIALS: Coyote grills must have at least 12″ clearance from any combustible materials (in any direction) for the safety of the homeowner and for any Coyote Warranty to remain in effect. You CANNOT locate the grill under any combustible material without an approved ventilation system located directly above the unit. To elaborate, Coyote defines an approved ventilation hood as: The ventilation hood chosen must be UL certified, produced for outdoor use and must be installed according to the hood manufacturer’s specifications. The hood must be installed at least 30″ above the top of the cooking surface. The hood must be at least 6″ wider that the grills frame (3″ on each side), not just the cooking surface.

INSULATED JACKETS AND COMBUSTIBLE CONSTRUCTION: If you elect to use combustible material to build your grill island AND the grill will be located within 12″ of the combustible material, then youmust use the appropriate Coyote insulated jacket. The insulated jacket will act as a barrier to protect your grill island from the heat and fire of your Coyote grill. If an insulated jacket is not used in acombustible material island, the warranty on the Coyote grill will be voided immediately and safety cannot be ensured