Install Specs

Overall Dimensions:

Cut-out Dimensions:

CLEARANCE TO COMBUSTIBLE MATERIALS

FROM NON-COMBUSTIBLE MATERIALS: Coyote side burners can be placed directly on, or adjacent to,non-combustible materials, subject to ventilation requirements. The hood on a Coyote side burner pivots mainly on the body. If you have a wall or partition behind the unit that would block ventilation,then a minimum of 7″ clearance from the back of the side burner to the wall is needed for the purpose of ventilation. If you do not have a wall or partition blocking the ventilation of the unit, then you only need an extra 2″ behind the unit for the hood to open fully. If you wish to use the rotisserie option, you will want to make sure that you leave adequate space (at least 6″) on each side of the side burner so that the motor and rotisserie spit handle will have room on the counter, as these extend past the overall dimensions of the side burner body.

FROM COMBUSTIBLE MATERIALS: Coyote side burners must have at least 24″ clearance from any combustible materials (in any direction) for the safety of the homeowner and for any Coyote Warranty to remain in effect. You CANNOT locate the side burner under any combustible material without an approved ventilation system located directly above the unit. To elaborate, Coyote defines an approved ventilation hood as: The ventilation hood chosen must be UL certified, produced for outdoor use and must be installed according to the hood manufacturer’s specifications. The hood must be installed at least 30″ above the top of the cooking surface.  The hood must be at least 6″ wider that the side burners frame (3″ on each side), not just the cooking surface.

INSULATED JACKETS AND COMBUSTIBLE CONSTRUCTION: If you elect to use combustible material to build your side burner island AND the side burner will be located within 24″ of the combustible material, then you must use the appropriate Coyote insulated jacket. The insulated jacket will act as a barrier to protect your side burner island from the heat and fire of your Coyote side burner. If an insulated jacket is not used in a combustible material island, the warranty on the Coyote side burner will be voided immediately and safety cannot be ensured.

Venting:

Ventilation for a gas side burner is absolutely mandatory to ensure that your side burner performs as intended and to ensure the safety of you, your family, and guests. Proper ventilation is necessary to allow heat inside your side burner to escape and also to allow any gas that has leaked from a tank or connection to escape before a buildup of such gas can occur and possibly ignite.