HPC 36-Inch Rectangle Torpedo H-Burner Bowl Pan Match Light Propane Gas Burner – TOR-MLFPK36X14-H-FLEX-LP
$1,365.50
This is our simplest certified fire pit insert- easy to operate and requires the least amount of maintenance.
- Description
- Additional information
- Fire Pit Install Specs
- Match Lit - How it Works
- Building A Gas Fire Pit
- Videos
- Research Center
- Download Center
- Shipping & Returns
- Warranty
Description
HPC 36-Inch Rectangle H-Burner Bowl Pan Match Light Torpedo Jetted Propane Gas Burner – MLFPK36X14-H-FLEX-LP
Making Evenings Unforgettable
The gas fire pit insert gives you the true flexibility to design the size, shape and feel of your own fire pit with ease and simplicity of using gas – no more stocking or carrying wood…and that smell of smoke – gone! Imagine your own creative and unique design as the focal point to your backyard.
Easy to use and safe are just a few of the features of this reliable fire pit burner. Perfect for fire pits without electricity. The simple design makes this burner very reliable and easy to use, it also comes with a manual ball valve that can be used to adjust the flame height. This rectangle shaped burner is CSA certified to pass all local codes and has an impress BTU rating of up to 65k. The H shaped burner is constructed from premium 304 stainless steel to resist rust and weathering from being outdoors. The commercial-grade SST Torpedo™ burner, is our newly designed nozzle which creates the largest flame on the market. The SST Torpedo Burners yield an enhanced bonfire like aesthetic. This is a great addition to our product offerings, providing customers with an array of flame options. This burner comes fully assembled and ready to install.
The HPC burner comes completely assembled and ready to drop in the enclosure.
Features:
- Fully Assembled and ready to install.
- Flex Line configuration provides versatile and simple installation.
- Valve mounting bracket included- for safe mounting of control have.
- Flame height is adjustable using key valve.
- Natural Gas or Liquid Propane: Factory built & tested for either fuel.
- CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements.
What’s Included?
- 1 (One) Rectangle Bowl Style Burner Pan
- 1 (One) 304 Stainless Steel H Burner
Weep Holes for Drainage - 1 (One) Whistle Free Flex Line
- Complete Instructions
- Fully Assembled
- Key Valve and Key
- Flex Lines from Valve to Burner
Additional information
| Weight | 30 lbs |
|---|---|
| Brands | HPC Fire |
| Fire Pit Gas Type | Liquid Propane (LP) |
| Fire Pit BTUs | 65,000 |
| Fire Pit Voltage | N/A |
| Fire Pit Ignition Type | Match Light |
| Fire Pit Burner Size | 30" x 8" |
| Fire Pit Burner Shape | H Style |
| Fire Pit Burner Material | 304 Stainless Steel |
| Fire Pit Plate Size | 36" x 14" |
| Fire Pit Plate Shape | Rectangle |
| Fire Pit Plate/Pan | Bowl Style |
| Fire Pit Plate Material | 304 Stainless Steel |
| Fire Pit Certifications | CSA |
| Amount of Media Needed | 1 Cu.Ft Lava Rock or 40-50Lbs Glass |
| Fire Pit Rolled Stones | 3- 1/2 cu. ft. Bag |
| Fire Pit Collars Needed | 4 Collars |
| Fire Pit Wind Guard | WG43X21-RECT |
| Fire Pit Covers | FPC-78X40 |
Fire Pit Install Specs
Total Gas Volume: 65,000 BTUs
- Natural Gas Fire Pit: Supply Pressure: Minimum: 3.5” W.C.; Maximum: 7.0” W.C.
- LP Gas:Supply Pressure: Minimum: 8.0” W.C.; Maximum: 11.0” W.C.
- Fuel line sizing is the responsibility of the installer and must be able to supply the stated maximum BTU for the product-refer to product label on fire pit.
Selecting the Location
- All fire pit inserts and systems are designed and intended for outdoor use only.
- Pick a location that allows sufficient horizontal room and safe egress to enjoy the fire pit while allowing a safe distance from the heat and flame.
- IMPORTANT:Deck Installation-If installing fire pit on a woodor composite deck it is required to use the Deck Insulation Kit.
CLEARANCES AROUND FIRE PIT:
Construction of the Fire Pit Enclosure
- Use non-combustible materials for construction of enclosure, gas supply and power.
- Adequate drainage for enclosure must be provided to prevent water damage to fire pit.
- The fire pit insert should be recessed a minimum of 2” from the top of the enclosure to protect flame from being blown out.
- The enclosure must be constructed on a stable surface. The weight of the fire pit must be supported by the pan and not by any control/valve box.Make sure that the structure is level.
- Fire pit insert must be accessible for service.
VENTING
- IMPORTANT:The minimum requirement is the enclosure incorporate 1 vent on at least 2 sides (2 vents total) at a minimum size of 18 sq. inches of total free area each (Example: 3”x 6” or larger) to ensure that heat and residual gas can escape.We prefer the enclosure incorporate 4 vents total (minimum 18 sq. inches each side) to reduce the risk of thermal shutdown on the EI Series-some enclosures may require more ventilation based on material, size and extended use.Installation of the vents in the mid to lower area of the enclosure is recommended. Failure to properly vent enclosure may result in the fire pit overheating or explosion. Continuous overheating could lead to heat damage to internal components. The vent may work as a drain as well when installed at bottom sidewall to prevent water build up.
- The interior void space of the enclosure surrounding the valve box cannot be filled with any material (gravel, crushed rock, concrete, etc.)-It is a requirement to have a minimum of 2” under the valve box for proper ventilation and drainage.
Match Lit - How it Works
How It Works?
Start-Up: light a long-reach lighter over the outer edge of the burner then slowly open key to the valve. Once the burner is lit, open the valve Leave key in valve during use.
Operation: Once the flame is lit, slowly turn the key to adjust the flame height.
Shut Down: To turn OFF the fire pit simply turn key to valve clockwise to OFF position. Remove key.
The Key Valve is installed in the side wall of the fire pit enclosure, typically just under the plate level so the key is easy to access and isn’t a trip hazard.
Building A Gas Fire Pit
(Step 1) Choosing the Right Burner
The Fire Pit Burner is the heart of the system, the burner will determine the size and shape of the fire pit. The burner regulates how much gas will be burned, the appearance of the flame, and how much heat and even the shape and height of the flame. Since there are many different styles and sizes this is where an expert can help guide you. Quality burners are tested and have safety certifications. At this time AOK only sells and stocks CSA Certified burners for your protection and safety. It is important to select the burner before the construction of the fire pit enclosure. The burner selection will determine the size and shape of the custom enclosure. More on the burners below…
Gas Type
The first choice in selecting a fire pit burner is to decide what gas type is best for the application and budget. Both Liquid Propane (LP) and Natural Gas (NG) burners are available and the burner must be ordered correctly for the type of gas being used. NG is typically piped from the street to a manifold that distributes the gas throughout the house and to your fire pit. LP gas is fed from tanks of various sizes which can be above ground or under ground. Smaller 20lb propane bottles can only support fire pits up to 85,000 BTUs, if you want a higher BTU burner you will need to install a larger tank. We recommended that a licensed professional determine the total amount of BTUs (Volume) your gas supply lines will support and also to size and install any gas appliance in accordance with local codes for safety. Once the gas type and volume is known then the ignition, size and shape can be chosen.
Ignition System
We offer three (3) CSA Certified Ignition Systems. CSA certification is the highest certification and is accepted by all government agencies that require UL and ANSI stamps. MATCH-LIT burners are the simplest technology and are certified up to 65,000 BTUS. Using a match, the fire is lit and the gas feed is manually adjusted to regulate flame height. PUSH BUTTON SPARK burners are certified up to 140,000 BTUs. Push button spark burners use a battery to ignite the flame and do not require electricity. They have a flame sensing control to turn off the gas should the flame blow out. ELECTRONIC IGNITION or Hot Wire Ignition (HWI) is certified up to 400,000 BTUs. Ignition is controlled from a 120V switch located near the fire pit and may also be controlled by a remote. This automated system includes a flame sensor to detect heat which will shut off the gas should the flame blow out. One awesome thing about HWI is the ability to control the fire pit from a good distance away from the burner, making it safer and more comfortable to lite the burner. Also, HWI is available in a 24 volt system when installations for fire pits are located close to water features.
Note: Picking the Right Burner:
Picking the right burner size can be intimidating, but there are some guidelines that can help make your decision faster and easier. The size of your fire pit pan should always be smaller than the inside diameter of your fire pit enclosure. We recommend that the plate size should be 2-3 inches smaller than the opening, so a 36 inch plate would be used in a 38-42 inch opening.
About the Burner Pan
All of the burners that AOK provides come with Stainless Steel pans that hold the burners. The burners are typically 6” shorter than the pan, except for the linear burners with trough pans. These pans sit directly below your burner, to provide support and proper placement for the components. We highly recommend purchasing fire pit burners with the pan and here’s why:
•The pan ensures that unburned gas doesn’t puddle below the burner, causing a safety issue and hazzard
•They provide a support for your burner ring, ensuring that it is level and mounted at all times. • They drastically reduce the amount of fire pit media required.
• Pans also help the water drainage in your fire pit by keeping the burner off the media.
Burner Shape
Round fire pit burners with round pans are the most common and make a good shape for conversation pits. Sizes range from 12” to 54”. Over the years square pits have become more popular with sizes ranging from 12-24”. There are many other shapes such as linear shape burners that make a dramatic statement. Once a shape is determined it is time to pick the style and size. This will ultimately tell you the shape and size of your fire pit enclosure.
Size and BTUs
The size of the fire pit burner is going to determine the BTUs as well. The larger the burner the higher the BTUs. This is an important step since this will determine how much impact and heat will be given off. Burners that produce less than 75,000 BTUs are generally used in smaller fire tables and premade fire pits. Burners that produce 100-150,000 BTUs produce a nice flame and are usually in the 24-30” range. The burners that I recommend are in the next range between 200-250,000 BTUs and 31-37” in diameter. These burners produce a full flame and give off enough heat to keep you warm on cooler nights. At AOK we carry a full range of burners that are certified up to our 400,000BTU burner.
(Step 2) The Enclosure
Once a burner has been selected, the size and shape of the enclosure can be determined. This is your chance to get creative….
Enclosure Shape & Materials
The Enclosure or the Fire Pit Shell contains the fire pit burner insert. The enclosure can be round, square, rectangular, or linear in shape, custom shapes are also a possibility but can be very challenging to construct. When constructing an enclosure great care should be taken when selecting the location. A perimeter of at least 4 feet around the fire pit is necessary for safe travel and seating. The height of the fire pit can vary, but it is typically a minimum of 18″ from the floor to the top of the burner with the cap of the fire pit above the burner, check the fire pit burner insert clearances before setting the final height. For the frame many building materials are available for the enclosure construction, including cement block, steel and aluminum studs. Use only non-combustible materials.
Drains, Air Vents & Shut Offs
Drainage is very important, so provide a way for the water to escape from the enclosure either by natural means or via central drain. Water trapped in the enclosure or in the media or around the burner is dangerous and will not smell good when the fire pit is lit. IMPORTANT!!! One of the most overlooked features of fire pit construction are the air vents. Air Vents provide ventilation so the proper fuel/air mixture can be achieved. Without the proper fuel mixture the fire will burn too rich creating a gas smell or too lean starving the flames. Equally as important, the vents provide a way for excess gas to escape. Without proper venting, a small leak under a fire pit burner can cause an explosion. Two to three air vents at the bottom of the enclosure in addition to a drain are recommended. Most fire pit burners require 36 sq. inches of venting total for proper venting. Most local codes will require a gas shut off device that is located within 3-6 feet of the pit for emergencies and repairs. Check with the local authorities or your license professional for the exact codes.
Construction
It is important when constructing a custom fire pit to make sure the fire pan can be easily removed. The pan should never be “locked” into place with mortar or the stone cap. The cap should also be properly spaced from the fire to prevent it from getting too hot, which may cause it to crack or explode. We recommend a 4-6″ space from the outer edge of the pan to the inner edge of the cap with the burner placed at the same level or lower than the bottom of the top cap, this helps protect the fire from being blown out by high winds. The fire pan must be properly suspended without media or filler beneath. The area under the fire pan should be open to allow for air to enter through the vents.
The Finishing Touches
Fire pit finishes must be made from a non- combustible material such as Stone, Stucco, Brick or Tile. There are also copper bowls and many other pre-made enclosures to choose from.
(Step 3) “Top It Off”
The Media you choose to cover the insert has a significant impact on both the overall look and impact of the fire pit and how the flame behaves. Lets look at some of the choices below and their characteristics….
The Media
It is important to use media that is designed for fire pit use, using stones and materials not designed for high heat can explode and create shrapnel. DECORATIVE FIRE GLASS – For a more contemporary look, Comes in a lot of different colors and sizes. For best results use 3-4″ to cover the burners. Note: AOK doesn’t recommend using glass over another media such as lava rock. Lava rock must be able to breath and allow the moisture to escape, using glass or another media over the lava rock can cause the moisture to be trapped in the lava rock that can produce steam that can expand and lead to explosions. LAVA ROCK – Used alone or as a base for outdoor fire logs. Lava rock is proven to increase performance but will break down over time. ROLLED LAVA STONE – Give you fire pit a oriental look. Lava stone can also be used around the burners and then combined with Lava Rock for a really cool look. RIVER ROCK – Lightweight ceramic stones “gel cast” and designed for outdoor exposure. comes in different colors. OUTDOOR FIRE LOGS – Made of gel cast ceramic fiber, log sets will glow red where the fire is hottest and radiate the heat outward for the warmest fire pit.
Videos
Shipping & Returns
Please call or email us to confirm the shipping time. 410-696-7300 or email us [email protected]
Returns of all new, unused and un-assembled items in their original packaging, and we’ll give you a full refund. We do subtract the cost of the original shipping & return shipping.
Warranty
Hearth Products Controls Company warranties product against manufacturing defects that prevent safe and correct operation of the product commencing from the date of original sale / shipment from HPC. The warranty on parts and in-house labor will apply only to claims presented to us by our original customer and is in lieu of all other warranties expressed or implied. Please refer to the Warranty Chart below for warranty periods.
The defective product must be shipped back with an RMA (Return Merchandise Authorization) issued by HPC for that specific product which states the nature of the defect or warranty claim. Product to be returned should be packed carefully—HPC is not responsible for damage on returned items. The original purchase information will be required. RMA’s are only valid for 30 days from the date of issue by HPC and will not be processed if received after the expiration date. The RMA number must be indicated on the outside of the return package and a copy of the RMA in the package with product.
Our warranty does not cover items that have been damaged by over heating, modification, abuse, improper storage, installation, or maintenance. This warranty excludes claims for incidental or consequential damage and indirect-collateral expenses arising from product defects or warranty recovery.
Hearth Products Controls Company is not responsible for local codes and / or if any of our products are not approved for installation. Please check with your local building department or governing agencies for proper approvals before purchasing. HPC is not responsible for the actions including negligence of the installer.
Refer to manufacturers manual for full warranty details.