Install Specs

Overall Dimensions:

Cut-Out Dimensions:

ELECTRICAL CONNECTIONS
A 120VAC (15 AMP minimum) GFCI GROUNDED 3-wire receptacle (not included) is required within
the vicinity of the unit to provide power to it. The GFCI receptacle must be a WEATHER-PROOF IN-USE
COVERED RECEPTACLE.

OVERHEAD CONSTRUCTION AND EXHAUST
HOOD REQUIREMENTS
A minimum 5 foot clearance is required between the countertop
and the overhead construction.
When installed under combustible overhead construction,
the area above the cooking surface of the unit must be
covered with an exhaust hood. The exhaust hood provides
the protection for the combustible overhead construction.

Important: DO NOT use this appliance under unprotected
combustible overhead construction.
When installed under overhead non-combustible construction,
an exhaust hood is highly recommended

REAR WALL CLEARANCES
For the minimum clearances between the unit and rear walls,
your setup must fall within one (or more) of the following:
A. Clearance between unit and strictly non-combustible
rear wall


• The unit must have a minimum clearance of 4″ from
the non-combustible rear wall.

(To allow for proper ventilation and prevent dangerous
overheating.)
B. Clearance between unit and a protected combustible
rear wall
i.e. a non-combustible wall in front of a combustible wall
to serve as a barrier. This can be accomplished by brick,

or a metal stud finished with non-combustible substrate,


• The unit must have a minimum clearance of 14″ from
the protected combustible rear wall.

(The 4″ non-combustible material plus an additional 10″
clearance between the unit and protected rear wall.)
C. Clearance between unit and combustible rear wall
• The unit must have a minimum clearance of 18″ from
the combustible rear wall
BACKSPLASH CLEARANCE (if applicable)
If a non-combustible backsplash exists, it must have a minimum

of a 4″ clearance from the rear of the unit (to allow for proper

ventilation and prevent dangerous overheating).
Important: This 4″ backsplash clearance must first be met
prior to any non-combustible walls beginning
behind it.
SIDE WALL / CORNER WALL CLEARANCES

(if applicable)
The unit must have a minimum clearance of 24″ from any

side walls (to account for variables in airflow that could affect

performance).